Ultimo CNC Pressbrake 4000mm x 175Ton. 2 Axis Graphical CNC Controller, Precision Servo Drive.

175 ton

Step 1. FASTDRAW: Simple & Easy!…..
Simply touch the grid to draw the subject profile.
Press OK to return to the main screen.
Step 2. Simply touch on the dimension or angle of the profile on the right to edit the value on the popup keypad.
Step 3. So simple!…….. See the profile on one side for easy editing….. and the folding simulation on the other!
• View the actual folding sequence simulation on the graphic of a Press Brake as you fold in real time or screen sequence mode.
• Change folds from front to rear to maximise production.
• Step through the whole sequence without wasting time or material.
• Touch the “Auto fold” button or set the fold sequence manually simply by entering the sequence (1 2 8 7 6 5 3 4 for the example).
Step 4. Enter material thickness and width.
Step 5. Select the right tool and die from the library and start production
Foldmaster – Easy steps to put you in production in no time!
Step 1. FASTDRAW: Simple & Easy!…..
Simply touch the grid to draw the subject profile.
Press OK to return to the main screen.
Step 2. Simply touch on the dimension or angle of the profile on the right to edit the value on the popup keypad.
Step 3. So simple!…….. See the profile on one side for easy editing….. and the folding simulation on the other!
• View the actual folding sequence simulation on the graphic of a Press Brake as you fold in real time or screen sequence mode.
• Change folds from front to rear to maximise production.
• Step through the whole sequence without wasting time or material.
• Touch the “Auto fold” button or set the fold sequence manually simply by entering the sequence (1 2 8 7 6 5 3 4 for the example).
Step 4. Enter material thickness and width.
Step 5. Select the right tool and die from the library and start production.

the most user friendly touch screen CNC controller on offer.
backed by the support team at Asset Plant offering direct contact.
large user friendly Touch Screen.
easy Job Selection.
select existing jobs from the library.
jobs can be named and saved for future use. A virtually unlimited number of jobs can be saved.
jobs open with all relevant data like bend sequence, material thickness, right Tool, Die & V, angle corrections, which bends were done from front or rear etc. This saves lots of set-up time.
each operator can have his own password with his own job library.

4000mm

Hydraulic synchronised positive stop design, electronically controlled by CNC iBend Programmable controller assuring accurate repeatability and ease of use..
CNC iBend programmable precision ball screw back gauge with adjustable height finger stops.
Segmented heavy duty 86° offset top tool, segmented for return bend clearance, complete with European style quick release tool holders.
Full length Multi Vee bottom block with a smart selection of openings also including safety edge vee (‘V’) for over bending.
Ball screw drive back gauge with quality support fingers also with vertical adjustment.
Sliding steel fabricated sheet supports enabling a wide range of material sizes to be aligned and supported at the correct required height.
Integrated hydraulic system allowing rapid approach switching automatically to slow bend.
Modern designed pendant foot pedal operation with stainless braided cable.
Variable hydraulic pressure control valving fitted standard.
Safety and material selection bending charts mounted on front beam for easy access.
Prices includes front and rear safety Laser Light Guarding to Australian compliance.
In addition, we can also offer 3 ~ 7 axis pressbrakes to suit your requirements.
CE compliant.

i-Bend Features
The most user friendly touch screen CNC controller on offer.
Backed by the support team at Asset Plant offering direct contact.
Large user friendly Touch Screen.
Easy Job Selection.
Select existing jobs from the library.
Jobs can be named and saved for future use. A virtually unlimited number of jobs can be saved.
Jobs open with all relevant data like bend sequence, material thickness, right Tool, Die & V, angle corrections, which bends were done from front or rear etc. This saves lots of set-up time.
Each operator can have his own password with his own job library.

i-Bend – Easy steps to put you in production in no time!
Step 1. FASTDRAW: Simple & Easy!…..
Simply touch the grid to draw the subject profile.
Press OK to return to the main screen.
Step 2. Simply touch on the dimension or angle of the profile on the right to edit the value on the popup keypad.
Step 3. So simple!…….. See the profile on one side for easy editing….. and the folding simulation on the other!
• View the actual folding sequence simulation on the graphic of a Press Brake as you fold in real time or screen sequence mode.
• Change folds from front to rear to maximise production.
• Step through the whole sequence without wasting time or material.
• Touch the “Auto fold” button or set the fold sequence manually simply by entering the sequence (1 2 8 7 6 5 3 4 for the example).
Step 4. Enter material thickness and width.
Step 5. Select the right tool and die from the library and start production
Foldmaster – Easy steps to put you in production in no time!
Step 1. FASTDRAW: Simple & Easy!…..
Simply touch the grid to draw the subject profile.
Press OK to return to the main screen.
Step 2. Simply touch on the dimension or angle of the profile on the right to edit the value on the popup keypad.
Step 3. So simple!…….. See the profile on one side for easy editing….. and the folding simulation on the other!
• View the actual folding sequence simulation on the graphic of a Press Brake as you fold in real time or screen sequence mode.
• Change folds from front to rear to maximise production.
• Step through the whole sequence without wasting time or material.
• Touch the “Auto fold” button or set the fold sequence manually simply by entering the sequence (1 2 8 7 6 5 3 4 for the example).
Step 4. Enter material thickness and width.
Step 5. Select the right tool and die from the library and start production.

19#0660 – STEELMASTER Plastic Die Cover Protective Folding Film – Sold Per Metre – Improves Bend Quality Finish
19+0127 – Pressbrake Bottom Dieblock, Catering Profile 4000mm – Excluding Holder
19+0240 – STEELMASTER Bottom Single 16mm Vee Tooling – US 20.416/35° V=16 R2,0 L.MM.835
19+0268 – STEELMASTER Fold & Crush Dutch Tooling – US 300/26° V=12 R2,0 L.MM.500
19+0114 – Single Edge Knife Top Punch – Pressbrake Tooling – 4000mm Long x 15º Profile – Type 2
19+0139 – Double Edge Knife Top Punch – Pressbrake Tooling – 4000mm Long x 35º Profile – Type 2
19+0238 – STEELMASTER US 152/88 Degree, Radius 0.8mm Press Brake Tooling – 835mm Long
50+0200 – Digital Thickness Gauge – 0mm ~ 15mm
50+0156 – Dial Protractor With Bevelled Blade – Metric Calibrations.
50+0112 – Digital LCD Vernier Calliper – 150mm Length.
50+0159 – Digital Micrometers – 0-25mm Range, Dual Reading, Metric & Imperial.

P.O.A - 15kg and up

175 Ton Bending Capacity
4000mm Bending Length
3600mm Distance Between Frames
420mm Side Throat Depth
200mm Ram Stroke
455mm Open Height
Italian DSP laser guards included
11.0Kw / 415V Motor Power
4480mm x 1940mm x 2800mm Footprint
15000Kg Weight

When selected an Ultimo Pressbrake v other so called CNC brands pay close attention to these key features included on ours Valued at over $20000
Frame Width – Wider the Better
Operating System Support – Ensure after sales support is directly through the supplier not 3rd party
Our CNC is Factory Fitted No Retro Fitted Like Others
Servo Driven – If It’s Not – wont operate efficiently
Quick Change Tool Holders – Must Have!
Sliding Front Supports
Beam Mounted Laser Guards – If not, will push the operator 400mm away from tooling restricting them from bending small pieces
Ends Top Tooling Scalloped Allowing Operator To Work The End Of The Tooling
Wall Mounted Ballscrew Back gauge allowing Flexible Material Bending
Open Rear Of Pressbrake With Laser Safety Guards
LED Illuminated Rear of Pressbrake Ensuring Better Operating Environment
Quality Back gauge Finger with Adjustable R Axis (Up & Down) Adjustment
The Above Quality Features add $20000+ In Valued Inclusions to Your Machine Not To Mention Make the Operator Experience Better!

Recommended Add On Accessories
19#0660 – STEELMASTER Plastic Die Cover Protective Folding Film – Sold Per Metre – Improves Bend Quality Finish
19+0127 – Pressbrake Bottom Dieblock, Catering Profile 4000mm – Excluding Holder
19+0240 – STEELMASTER Bottom Single 16mm Vee Tooling – US 20.416/35° V=16 R2,0 L.MM.835
19+0268 – STEELMASTER Fold & Crush Dutch Tooling – US 300/26° V=12 R2,0 L.MM.500
19+0114 – Single Edge Knife Top Punch – Pressbrake Tooling – 4000mm Long x 15º Profile – Type 2
19+0139 – Double Edge Knife Top Punch – Pressbrake Tooling – 4000mm Long x 35º Profile – Type 2
19+0238 – STEELMASTER US 152/88 Degree, Radius 0.8mm Press Brake Tooling – 835mm Long
50+0200 – Digital Thickness Gauge – 0mm ~ 15mm
50+0156 – Dial Protractor With Bevelled Blade – Metric Calibrations.
50+0112 – Digital LCD Vernier Calliper – 150mm Length.
50+0159 – Digital Micrometers – 0-25mm Range, Dual Reading, Metric & Imperial.

Frame Width – Wider the Better
Operating System Support – Ensure after sales support is directly through the supplier not 3rd party
Our CNC is Factory Fitted No Retro Fitted Like Others
Servo Driven – If It’s Not – wont operate efficiently
Quick Change Tool Holders – Must Have!
Sliding Front Supports
Beam Mounted Laser Guards – If not, will push the operator 400mm away from tooling restricting them from bending small pieces
Ends Top Tooling Scalloped Allowing Operator To Work The End Of The Tooling
Wall Mounted Ballscrew Back gauge allowing Flexible Material Bending
Open Rear Of Pressbrake With Laser Safety Guards
LED Illuminated Rear of Pressbrake Ensuring Better Operating Environment
Quality Back gauge Finger with Adjustable R Axis (Up & Down) Adjustment
The Above Quality Features add $20000+ In Valued Inclusions to Your Machine Not To Mention Make the Operator Experience Better!